Welcome to visit: Jiangsu Ruite Machinery Manufacturing Co. Ltd. official website
Hotline
0515-82068385

Product Center

Grain harvester

    Spline shaft

      Suspension assembly

        Crankshaft

          Contact us

          Jiangsu Ruite Machinery Manufacturing Co. Ltd.

          Telephone:0515-82068385

          Fax:0515-82068385

          Mr. Pan: 13705116199

          Mr. Zhou: 13337999608

          Mailbox:ruite2000@163.com

          Website:www.jsruite.com

          Address:Jianhu County Huiwen Road No. 999

          资讯浏览

          Safety operation rules for spline shaft grinding machine

          发布日期:2016-9-14 浏览次数: 391次

          1) check the wheel protective cover, belt guard, whether intact, all screws must be firmly secured.

          2) check table travel block, according to the workpiece length adjustment table travel block distance, wheel center should be far away from the workpiece keyway right end 150mm. Stroke bump must be adjusted and fixed.

          3) must be used to trace the feed wheel, the grinding wheel and the workpiece tooth surface contact all gradually.

          4) check the working table, speed handle should be in the stop position, the grinding wheel should retreat from the working position.

          5) operation of the machine tool, cutting the work by hand don't, don't look down myopia cutting, is prohibited in the head stroke. Measurement must be stopped.